Haas Laser Technologies, Inc. - Laser Beam Delivery Components - Capacitive Height Sensing System, CHS-6000

Phone: 973.598.1150
Fax: 973.598.1151
Email: sales@haaslti.com

Accessories & Related Products

CHS CAPACITIVE HEIGHT SENSING SYSTEM Part #: CHS-6000 To attain high quality cutting results, a precise control of the stand-off distance between the nozzle tip and the workpiece is required. The nozzle tip stand-off can be controlled within 0.01mm by using the CHS-6000 Capacitive Height Sensing System. The CHS-6000 measures the nozzle tip stand-off distance and converts the measurement into an analog output signal. After calibrating the system to three known stand-off distances, the on-board microprocessor digitally linearizes the analog output signal. Automatic calibration can be accomplished by a simple PMC-interface. Two channel technology allows the user to store two different calibration curves for different nozzle types. For use with conductive work surface. Non-conductive materials require a tactile adapter (TTA-3029-M8-AMX) in place of the capacitive height sensing nozzle.	CHS-6000
CHS-6000 Features: Microprocessor Controlled Software Controlled Sensor Calibration Digital Linearization. Linear Range ± 3.5mm 3 Point Calibration Teach Process ± 10 VDC Analog Output 2 Channel Technology for Different Nozzle Designs Nozzle Tip Touch Alarm Cable Disconnect & Short Alarm Quick/Rapid Approach Function Reduce Gain Function Plasma Detection Function Position Hold Function	CHS-6000 Specifications: Rated Voltage: 110VAC / 220VAC Power Consumption: 500ma@110VAC Workpiece: Electrically Conductive. Connected to GND. Analog Output: DC ±10V or 0-10V Output Limit: ~±12V Response Frequency: 2KHz / 500Hz Operating Temperature: 0-40 deg C Output Impedance: 100 ohm Enclusure: Industrial NEMA 12

	CHS-6000A-SC15	Ultra-Low Noise Capacitive Sensor Cable Assembly. Triaxial Design. 15m length. BNC to SMA Connection. Additional configurations available.
	CHS-6000A-JB	Junction Box. Provides junction between Sensor Cable and Electrode Cable. SMA to MCX Connection. Additional configurations available.
	CHS-6000A-EC300 CHS-6000A-EC510	300mm Electrode Cable. Connects between Junction Box and Capacitive Nozzle Body. MCX to MCX Connection. Additional configurations available. 510mm Electrode Cable. Connects between Junction Box and Capacitive Nozzle Body. MCX to MCX Connection. Additional configurations available.
	NZL-3029-M8-AMX	Capacitive Nozzle Body for M8 Nozzle Tip. (Several designs available). CLICK HERE FOR CAPACITIVE HEIGHT SENSING NOZZLE BODIES
	TTA-3029-M8-AMX	Standard Tactile Adapter. (Several designs available). For use with non-conductive materials.

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery l

Beam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head