Haas Laser Technologies, Inc. - Laser Beam Delivery Components - CHS Capacitive Height Sensing System, CHS-8000

Phone: 973.598.1150
Fax: 973.598.1151
Email: sales@haaslti.com

Accessories & Related Products

CHS CAPACITIVE HEIGHT SENSING SYSTEM

Part #: CHS-8000

To attain high quality cutting results, a precise control of the stand-off distance between the nozzle tip and the workpiece is required. The nozzle tip stand-off can be controlled within 0.01mm by using the CHS-8000 Capacitive Height Sensing System. The CHS-8000 measures the nozzle tip stand-off distance and converts the measurement into an analog output signal. After calibrating the system to three known stand-off distances, the on-board microprocessor digitally linearizes the analog output signal. Automatic calibration can be accomplished by a simple PMC-interface. Two channel technology allows the user to store two different calibration curves for different nozzle types. For use with conductive work surface. Non-conductive materials require a tactile adapter (TTA-3029-M8-AMX) in place of the capacitive height sensing nozzle.

CHS-8000

CHS-8000 Features:

Designed for Haas LTI Motorized Z Axis (MZA)
Includes Servo Amplifier, Controls & Interface
Microprocessor Controlled
Software Controlled Sensor Calibration
Digital Linearization. Linear Range ± 3.5mm
3 Point Calibration Teach Process
± 10 VDC Analog Output
2 Channel Technology for Different Nozzle Designs
Nozzle Tip Touch Alarm
Cable Disconnect & Short Alarm
Quick/Rapid Approach Function
Reduce Gain Function
Plasma Detection Function
Position Hold Function

CHS-8000 Specifications:

Rated Voltage: 110VAC / 220VAC
Power Consumption: 9A@110VAC
Workpiece: Electrically Conductive. Connected to GND.
Response Frequency: 2KHz / 500Hz
Operating Temperature: 0-40 deg C
Output Impedance: 100 ohm
Enclusure: Industrial NEMA 12

Click Images for enlarged view

	CHS-6000A-SC15	Ultra-Low Noise Capacitive Sensor Cable Assembly. Triaxial Design. 15m length. BNC to SMA Connection. Additional configurations available.
	CHS-6000A-JB	Junction Box. Provides junction between Sensor Cable and Electrode Cable. SMA to MCX Connection. Additional configurations available.
	CHS-6000A-EC300 CHS-6000A-EC510	300mm Electrode Cable. Connects between Junction Box and Capacitive Nozzle Body. MCX to MCX Connection. Additional configurations available. 510mm Electrode Cable. Connects between Junction Box and Capacitive Nozzle Body. MCX to MCX Connection. Additional configurations available.
	NZL-3029-M8-AMX	Capacitive Nozzle Body for M8 Nozzle Tip. (Several designs available). CLICK HERE FOR CAPACITIVE HEIGHT SENSING NOZZLE BODIES
	TTA-3029-M8-AMX	Standard Tactile Adapter. (Several designs available). For use with non-conductive materials.

Laser Beam Bender l Laser Focus Head l Capacitive Height Sensing l Laser Head l Laser Beam Delivery l

Beam Delivery l Beam Expander l Fiber Laser l Laser Process Head l Fiber Laser Process Head