Laser Beam Delivery 75mm Series

75mm Laser Process Heads

75mm Laser Process Head G5 Series

G5-75 Laser Process Head

The G5 Series Laser Process Head is designed for High-Speed Multi-Kilowatt Cutting Applications. The G5 Series provides additional Z-Axis adjustment of the focus lens cell to compensate for varying High-Pressure Optic Thickness. Internal water passage reduces outside cooling lines on multiple focal length configurations.

Haas part # G5-75 shown above.

Features

X-Y-Z Adjustable Optic Cartridge Design
Up to +/- 5mm Z Optic Cartridge adjustment for different optic thickness
Internal Cooling of Multiple Optic Configurations
Crash Detection and Protection Options
Calibrated Nozzle Tip Stand-off Adjustment
Water-Cooled Optics
Gas Jet Manifold
Multiple Optic Options
Available for a Wide Variety of Optics
Modular Design for Custom Configurations
All Metric Stainless Steel Hardware

Specifications

45.5mm Clear Aperture
Uses Standard 2.0" dia. Optics
Rated up to 6KW
Gas Jet Pressure Rated to 25 Bar (365PSI)
Anodized Aluminum, Brass, and Stainless Steel Construction
Acceleration Stability up to 2G
Robust Design

G5 Laser Process Head (G5) Part Numbering Anatomy

G5-75


	:
	:


	:
	:


	:
	:

Crash Protection & Dection Devices : Part #G5-63-XYZ-S

		Specs
		2-Stage X-Y-Z Crash Detection/Protection Unit (Compact Design). Stage 1 permits Up to +/- 10 deg. of deflection. Three Internal, Series Wired Switches Detect and Report the Crash Condition. Stage 2 incorporates a Magnetic Break-away of the Entire Laser Head to Protect the Unit from Damage. Internal Hardened Steel Locating Pads allow the unit to be Precisely relocated back into place. A protective Bellows seals the unit while acting as a tether to support the unit from falling upon a crash break-away condition. Haas Part # 63-XYZ-L: 2-Stage X-Y-Z Crash Detection/Protection Unit (Extended Design). Stage 1 permits Up to +/- 10 deg. of deflection. Three Internal, Series Wired Switches Detect and Report the Crash Condition. Stage 2 incorporates a Magnetic Break-away of the Entire Laser Head to Protect the Unit from Damage. Internal Hardened Steel Locating Pads allow the unit to be Precisely relocated back into place. A protective Bellows seals the unit while acting as a tether to support the unit from falling upon a crash break-away condition. Haas Part #63-XYZ-BA: Disposable Break-Away Crash Protection. The unit is designed to allow the break-away of the laser process head from a crash condition.

Water Cooled Spacers

		Specs
		63-CR-Z: Optic Cartridge Retainer for all G5" Series" Optic Cartridges. 1/4-80 pitch X-Y Optic Cartridge Adjustment Screws. 63-CR-Z-TS: Optic Cartridge Retainer for all G5" Series" Optic Cartridges. 1/4-80 pitch X-Y Optic Cartridge Adjustment Thumb Screws.

Optic Cartridges

		Specs
		63-CZ-5.0: Optic Cartridge for 2.5" dia. x 5.0" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Internal +/- 4mm Z Adjustment for Optic Focal Length Correction, Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place. 63-CZ-7.5: Optic Cartridge for 2.5" dia. x 7.5" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Internal +/- 5mm Z Adjustment for Optic Focal Length Correction, Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place. 63-CZ-10: Optic Cartridge for 2.5" dia. x 10" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Internal +/- 5mm Z Adjustment for Optic Focal Length Correction, Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place. 63-DCZ: Dummy Cartridge. Used for multiple focal length configurations to seal unused optic slots.

Optic Cartridge Retainers w/gas Jet Manifolds

		Specs
		63-CR-Z-GJ: Optic Cartridge Retainer with Gas Jet Manifold for all G5" Series" Optic Cartridges. Gas Jet is rated at 31 Bar (450PSI). Accepts BSPT Air Fitting. 1/4-80 pitch X-Y Optic Cartridge Adjustment Screws. 63-CR-Z-GJ-TS: Optic Cartridge Retainer with Gas Jet Manifold for all G5" Series" Optic Cartridges. Gas Jet is rated at 31 Bar (450PSI). Accepts BSPT Air Fitting. 1/4-80 pitch X-Y Optic Cartridge Adjustment Thumb Screws

Nozzle Tip Stand-Off Adjusters

		Specs
		63-TSA-20-433: Nozzle Tip Stand-off Adjuster Long. Rated at 25 Bar (365PSI). Laser- Marked Calibrated Rotary Barrel Adjustment.Adjustable zero-point setting. -5mm and +15mm Travel. Robust Stainless Steel, Brass, and Anodized Aluminum Design. (For Focal Lengths 5.0" and longer) 63-TSA-10-300: Nozzle Tip Stand-off Adjuster Short. Rated at 25 Bar (365PSI). Laser-Marked Calibrated Rotary Barrel Adjustment.Adjustable zero-point setting. -5mm and +5mm Travel. Robust Stainless Steel, Brass, and Anodized Aluminum Design. (For Focal Lengths shorter than 5.0")

Nozzle Tip Holders : Part #NZL-3029-625-XXX

		Specs
		NZL-3029-625-XXX: Standard Non-Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a 625 thread laser nozzle. NZL-3029-M8-XXX: Standard Non-Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. NZL-3029-625-AMX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a 625 thread laser nozzle. MCX Connector. NZL-3029-625-ASX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a 625 thread laser nozzle. SMA Connector. NZL-3029-M8-AMX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. MCX Connector. NZL-3029-M8-ASX: Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. SMA Connector. NZL-3029-M8-FMX: Forced Air-Cooled Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. MCX Connector. NZL-3029-M8-FSX: Forced Air-Cooled Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle. SMA Connector.