25mm Laser Beam Adapters, Clamps, Mounts, Beam Tubes

25mm Targets & Optic Wrenches

Alignment targets aid in the centering of the laser beam relative to the mechanical center of beam delivery components. The 25mm clear aperture series has two standard targets designed to satisfy most alignment needs. Both targets have an anodized aluminum construction with 0.9mm diameter brass crosshairs.

25mm G1 Series Target

		Haas Part #		USE
		TGT-G1		G1-25 Laser Heads
		Target for G1 "Series" Laser Process Head
						Download Technical Drawing

Laser Beam Bender Alignment Target

		Haas Part #		USE
		TGT-BBK-25		BBK-25 Kinematic Beam Bender
		After removing the kinematic plate of the beam bender, the beam bender alignment target is installed with cross-hairs in the same plane as the optic. Alignment between beam benders can be made without removing beam tubes.
						Download Technical Drawing

25mm Target

		Haas Part #		USE
		TGT-25		Can be used with various 25mm system components Consult with a Haas Laser Engineer
		Target for 25mm C.A. Beam Delivery Systems. Used to align bore sight.
						Download Technical Drawing

Threaded Alignment Target

		Haas Part #		USE
		TGT-THD-25		LAM-25 Linear Adjustable Mounts PHA-25 Laser Head BEC-25 Beam Expander/Collimator
		1 1/4"-32 male threads allow the threaded alignment target to connect easily with the output side of the LAM-25, PHA-25 and BEC-25, as well as other 25mm clear aperture components.
						Download Technical Drawing

G6 Series Optic Wrench

		Haas Part #		USE
		OW-25-G6		G6-25 Laser Head with .95" G6 optic locking ring
		The optic wrench has an anodized aluminum construction and is specifically designed for tightening and loosening the focus lens of the G6-25.
						Download Technical Drawing

Universal Optic Wrench

		Haas Part #		USE
		OW-110-092		PHA-25 Laser Head with .92" Optic Locking Ring Can be used with G1 Laser Head with 1.0" Diameter Optic
		The optic wrench has an anodized aluminum construction and is specifically designed for tightening and loosening the focus lens of the PHA-25 & G1-25
						Download Technical Drawing

G1-25 Optic Wrench

		Haas Part #		USE
		OW-110-098		G1-25 Laser Head with .98" Optic Locking Ring
		The optic wrench has an anodized aluminum construction and is specifically designed for tightening and loosening the focus lens of the G1-25.
						Download Technical Drawing

Additional options available upon request

We would be happy to discuss a custom designed solution that's right for any project, large or small. For additional information, contact a Haas Laser Technology sales representative today. (973) 598-1150

** Specifications subject to change without notice. Consult a Haas Laser Tech engineer for the latest specification changes or any additional assistance. **