38mm Series Laser Beam Components

38mm Laser Beam Enhancement Components

19mm Translation Mount for Laser Beam Expander/Collimator

TM-38 Translation Mount
for Laser Beam Expander/Collimator

Translation Mounts are designed for the critical alignment of transmissive optics, such as placing a beam collimator within a pre-existing beam path.

When two mounts are used on each end of a component, translational and angular corrections can be made. The internal, sealed stage is adjusted via four ultra fine 1/4"-80 pitch screws within a ±2mm range. A self-aligning joint allows for the placement & removal of a componen t without affecting the beam path.

TM-38-S-C shown with BEC-38 Collimator above.

38mm Translation Mount for Beam Expander/Collimator, TM-38

Specifications

Machined From Stainless Steel & Anodized Aluminum
Sealed Design
"Quick-Connect" Self-Aligning Joint
1/4"-80 Pitch Adjustment Screws
±2mm Adjustment Range
38mm Clear Aperture
Several additional mounting configurations available

Translation Mount (TM) Part Numbering Anatomy
for Laser Beam Expanders/Collimator

TM-38

Adjustment
S	:	Four Fine Pitch Screws
P	:	Screws/Spring Plungers

Mount
C	:	1" -32 C-Mount (Female)
H	:	1.5" B.C.
S		Synrad

Additional options available upon request

We would be happy to discuss a custom designed solution that's right for any project, large or small. For additional information, contact a Haas Laser Technology sales representative today. (973) 598-1150

** Specifications subject to change without notice. Consult a Haas Laser Tech engineer for the latest specification changes or any additional assistance. **