Laser Beam Delivery 25mm Series

25mm Laser Process Heads

25mm Laser Process Head G6 Series

G6-25 Laser Process Head

The G6 Series Laser Process Head is designed for High-Speed Cutting Applications. The G6 Series provides front-adjustable X-Y optic centering capability. It can be configured with multiple focal lengths.

Haas part # G6-25-L shown above without Crash Detection.

Features

24.7mm Clear Aperture
Uses Standard 1.1" Dia. Optics
Gas Jet Pressure Rated to 25 Bar (365PSI)
Anodized Aluminum, Brass & Stainless Steel Construction
Acceleration Stability up to 2G
Robust Design

Specifications

X-Y Adjustable Optic Cartridge Design
Crash Detection and Protection Options
Calibrated Nozzle Tip Stand-off Adjustment
Water-Cooled Optics
Gas Jet Manifold
Multiple Optic Options
Available for a Wide Variety of Optics
Modular Design for Custom Configurations
All Metric Stainless Steel Hardware
Many Pre-Assembled Configurations Available

G1 Laser Process Head (G1) Part Numbering Anatomy

G1-25


	:
	:


	:
	:


	:
	:

Laser Process Head Assembly : Part #G6-25-C

		Specs
		24.7mm Clear Aperture G6 "Series" Laser Process Head Assembly w/ 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting,Magnetic Break-Away with Micro-Switch Reporting, Gas Jet Manifold rated at 25 barr, Assist Gas Optic Cooling, X-Y Adjustable Optic Cartridges for 1.1" Dia. X 5.0" and 7.5" Focus Lens with 1/4"-80 Adjustment Screws, Water-Cooled, Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -15 +5, Capacitive Height Sensing Body, Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

Laser Process Head Assembly : Part #G6-25-L

		Specs
		24.7mm Clear Aperture G6 "Series" Laser Process Head Assembly w/ 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Gas Jet Manifold rated at 25 barr, Assist Gas Optic Cooling, X-Y Adjustable Optic Cartridges for 1.1" Dia. X 5.0" and 2.5" Focus Lens with 1/4"-80 Adjustment Screws, Water-Cooled, Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -4 +2, Capacitive Height Sensing Body, Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

Laser Process Head Assembly : Part #G6-25-H

		Specs
		50mm Clear Aperture G4 "Series" Laser Process Head Assembly w/ 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Gas Jet Manifold rated at 31 barr, Assist Gas Optic Cooling, X-Y Adjustable Optic Cartridges for 2.0" Dia. X 5.0" and 3.5" Focus Lens with 1/4"-80 Adjustment Screws, Water-Cooled, Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -15mm +5mm, Capacitive Height Sensing Body w/ Air-Cooling Option, Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

Laser Process Head Assembly : Part #G6-25-G

		Specs
		24.7mm Clear Aperture G6 "Series" Laser Process Head Assembly w/ 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Gas Jet Manifold rated at 25 barr, Assist Gas Optic Cooling, X-Y Adjustable Optic Cartridge for 1.1" Dia. X 3.5" Focus Lens with 1/4"-80 Adjustment Screws, Water-Cooled, Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -4 +2, Capacitive Height Sensing Body, Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

Laser Process Head Assembly : Part #G6-25-J

		Specs
		24.7mm Clear Aperture G4 "Series" Laser Process Head Assembly w/ 3-Axis (XYZ axis) Crash Detection with Micro-Switch Reporting, Magnetic Break-Away with Micro-Switch Reporting, Gas Jet Manifold rated at 25 barr, Assist Gas Optic Cooling, X-Y Adjustable Optic Cartridge for 1.1" Dia. X 5.0" Focus Lens with 1/4"-80 Adjustment Screws, Water-Cooled, Calibrated High-Pressure Stainless Steel Nozzle Tip Stand-Off Assembly with 0.025mm Resolution and Travel of -5 +15, Capacitive Height Sensing Body, Replaceable Copper Nozzle Tip. Stainless Steel and Anodized Aluminum Construction. All Metric Stainless Steel Hardware.

Crash Protection & Dection Devices : Part #G6-25-XYZ-S

		Specs
		2-Stage X-Y-Z Crash Detection/Protection Unit (Compact Design). Stage 1 permits Up to +/- 10 deg. of deflection. Three Internal, Series Wired Switches Detect and Report the Crash Condition. Stage 2 incorporates a Magnetic Break-away of the Entire Laser Head to Protect the Unit from Damage. Internal Hardened Steel Locating Pads allow the unit to be Precisely relocated back into place. A protective Bellows seals the unit while acting as a tether to support the unit from falling upon a crash break-away condition. Haas Part # 38-XYZ-L: 2-Stage X-Y-Z Crash Detection/Protection Unit (Extended Design). Stage 1 permits Up to +/- 10 deg. of deflection. Three Internal, Series Wired Switches Detect and Report the Crash Condition. Stage 2 incorporates a Magnetic Break-away of the Entire Laser Head to Protect the Unit from Damage. Internal Hardened Steel Locating Pads allow the unit to be Precisely relocated back into place. A protective Bellows seals the unit while acting as a tether to support the unit from falling upon a crash break-away condition. Haas Part #38-XYZ-BA: Disposable Break-Away Crash Protection. The unit is designed to allow the break-away of the laser process head from a crash condition.

Water Cooled Spacers

		Specs
		6-25-ST: Spacer block used on top of process head assembly. G6-25-S-5.0-7.5: Spacer block used with 5.0" and 7.5" f.l. configuration. G6-25-S-2.5-5.0: Spacer block used with 2.5" and 5.0" f.l. configuration. G6-25-S-3.5-5.0: Spacer block used with 3.5" and 5.0" f.l. configuration.

Optic Cartridge Retainer : Part #G4-38-CR

		Specs
		G6-25-CR: Optic Cartridge Retainer for all G6" Series" Optic Cartridges. 1/4-80 pitch X-Y Optic Cartridge Adjustment Screws. G6-25-CR-TS: Optic Cartridge Retainer for all G6" Series" Optic Cartridges. 1/4-80 pitch X-Y Optic Cartridge Adjustment Thumb Screws.

Optic Cartridges

		Specs
		G6-25-C-2.5: Optic Cartridge for 1.1" dia. x 2.5" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place. G6-25-C-3.5: Optic Cartridge for 1.1" dia. x 3.5" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place. G6-25-C-5.0: Optic Cartridge for 1.1" dia. x 5.0" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place. G6-25-C-7.5: Optic Cartridge for 1.1" dia. x 7.5" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place. G6-25-C-10: Optic Cartridge for 1.1" dia. x 10" F.L. Focus Lens. Includes reusable Indium "C" Seal and Optic Retainer Lock Ring. Upper and Lower Seals permit X-Y Cartridge Adjustment while sealing the beam path from contamination. Hardened Steel inserts provide precise relocation of cartridge. A Stainless Steel Thumbscrew locks the cartridge in place. NZL-3029-M8-FSX: Dummy Cartridge. Used for multiple focal length configurations to seal unused optic slots.

Optic Cartridge Retainers w/gas Jet Manifolds : Part #G6-25-CR-GJ

		Specs
		Optic Cartridge Retainer with Gas Jet Manifold for all G4" Series" Optic Cartridges. Gas Jet is rated at 25 Bar (365PSI). Accepts BSPT Air Fitting. 1/4-80 pitch X-Y Optic Cartridge Adjustment Screws. Haas Part# 25-CR-GJ-TS: Optic Cartridge Retainer with Gas Jet Manifold for all G6" Series" Optic Cartridges. Gas Jet is rated at 25 Bar (365PSI). Accepts BSPT Air Fitting. 1/4-80 pitch X-Y Optic Cartridge Adjustment Thumb Screws.

Nozzle Tip Stand-Off Adjusters

		Specs
		TSA-25-7-433: Nozzle Tip Stand-off Adjuster Long. Rated at 25 Bar (365PSI). Laser- Marked Calibrated Rotary Barrel Adjustment.Adjustable zero-point setting. -15 +5 Travel. Robust Stainless Steel, Brass, and Anodized Aluminum Design. (For Focal Lengths 5.0" and longer) TSA-25-7-300: Nozzle Tip Stand-off Adjuster Short. Rated at 25 Bar (365PSI). Laser-Marked Calibrated Rotary Barrel Adjustment.Adjustable zero-point setting. -4 +2 Travel. Robust Stainless Steel, Brass, and Anodized Aluminum Design. (For Focal Lengths shorter than 5.0")

Nozzle Tip Holders : Part #NZL-3029-625-XXX

		Specs
		NZL-3014-M8-AMX: Standard Non Capacitive Nozzle Tip Holder. Screws directly into the Nozzle Tip Stand-off Adjuster. Accepts a M8 thread laser nozzle.